♦ Function:Beer maturation/conditioning/serving/filtered beer receiving 

♦ Tank Capacity: 2000L (+20% Headspace minimum) 

♦ Interior Shell: SUS304 full welded; TH=3mm 

♦ Exterior Shell:SUS304 full welded; TH=2mm 

♦ 100% TIG welding with pure argon gas shield 

♦ Interior Finish: Sanitary 2B finish, Pickled and Passivated; (8K Mirror finish optional) 

♦ Exterior Finish: Oil brushed finish（2B, 8K Mirror finish optional) 

♦ Interior full polished to 0.2~0.4 μm without dead corner 

♦ Insulation: TH=80mm with low thermal conductivity PU 

♦ Cooling: 35% Glycol liquid -5℃ 

♦ Cooling Jacket: Dimple plate on bottom and side wall, welded without over burning 

♦ Jacket test by water and gas, 5bar/75psi for 1hour, 3.5bar/52psi for 48 hours 

♦ Jacket Working Pressure: < 2bar/30psi ♦ Tank leakage test by water and gas, 4bar/60psi for 1hour, 2.5bar/37.5psi for 48 hours 

♦ Tank Working Pressure: ≦ 2bar/30psi 

♦ Sanitary side mounted oval manhole with pressured door (Top mounted available) 

♦ Top mounted double clamp 360° rotary CIP spraying ball and port, 1pcs 

♦ CIP arm with four-way connection and butterfly valve 

♦ Mechanical safe valve PVRV 2bar/30psi on top (1bar/15psi available) 

♦ Full sanitary sampling valve with EPDM seal 

♦ Carbonation port with CO2 dissolved stone 0.22um 

♦ Hydraulic shock pressure gauge on CIP arm （Diaphram type for optional) 

♦ Sanitary level tube and valves 

♦ Discharge arm with butterfly valve, Removable and easy to clean 

♦ Sanitary welded thermowell for high accuracy temperature sensor 1pcs 

♦ Glycol water in/out port on side wall, Thick wall pipe thread (Top or bottom design available) 

♦ Glycol water in/out port on cone, Thick wall pipe thread (Top or bottom design available) 

♦ 4pcs completely SUS304 legs with braces ♦ 4 sets heavy duty foot pad with up-down and slop adjustable